Records 5,530
Page 135/461

SCHURTER's SUT-H 6.3mm x 32mm ceramic fuses for high power and inrush current requirements
2023-01
Semiconductors
Schurter
[Jan 2 2023] SCHURTER 6.3mm x 32mm ceramic fuses are rated from 10 a to 50 a, especially for high inrush current applications. The SUT-H has a higher melting integral than SCHURTER's standard SUT, which makes it extremely pulse resistant to high spurt currents, as well as providing absorption of such currents in the supply unit. The fuses also feature high break capacities of up to 500 a @ 250 V(AC) and 10 kA ...

The amplifier of Texas Instruments has advanced battery current management and integrated class H boost converter
2023-01
Semiconductors
Texas Instruments
[Jan 2 2023] Texas Instruments TAS2110 is a digital input Class D audio amplifier in an algorithmically controlled 11v Class H booster QFN package. The pre-algorithm optimizes the boost level to match the output of the audio signal. This provides the required power for peak output, significantly reducing average power consumption compared to constant output gain. The algorithm is configured with the PurePath ...
Vishay Semiconductor has announced a fully integrated proximity and ambient light sensor with a range of up to 1.5 meters
2023-01
Semiconductors
Vishay Semiconductor Diodes Division
[Jan 2 2023] Vishay Semiconductor's VCNL4200 3-in-1 sensor features a high-power infrared transmitter, near-field and ambient light detector, signal processing IC, and 12 /16 bit ADC while providing interrupt functionality and supporting I(2)C bus communication interface for smart home, industrial, and office applications. The VCNL4200 provides 50% closer detection than its predecessor, providing on-site dete ...

Analog Devices μ module isolators for test, measurement, and isolation requirements
2023-01
Semiconductors
Analog Devices
[Jan 2 2023] Analog Devices The LTM2886 and LTM2887 are complete current digital μ module isolators. No external components are required. A 3.3V or 5V power supply feeds both sides of the interface through an integrated, isolated DC/DC converter. Logic power pins allow easy connection of different logic levels from 1.62V to 5.5V, independent of the main power supply. The options available conform to SPI and I ...

Analog Devices' Dacs provide a digitally programmable current source with multiple output ranges from -60 mA to +300 mA
2023-01
Semiconductors
Analog Devices
[Jan 2 2023] Analog Devices' AD5770R 6-channel 14-bit current-output DAC features both on-chip reference and serial peripheral interfaces (SPI), providing a smaller footprint and higher power efficiency than existing offset solutions. The small form factor allows the 100G/400G coherent data module to migrate to the small Form factor CFP module while still providing the necessary output signal range and perfor ...

Texas Instruments provides LMG5200 half bridge GaN power level, highly integrated high side and low side grid drivers
2023-01
Semiconductors
Texas Instruments
[Jan 1 2023] Texas Instruments' LMG5200 device, 80v, 10a driver plus GaN half-bridge power stage, provides an integrated power level solution using enhanced mode gallium nitride (GaN) FETs. The device consists of two 80 V GaN Fets driven by a semi-bridge structure of high frequency GaN FET drivers. GaN FeTs have significant advantages in power conversion because of their near zero reverse recovery and very sm ...

Texas Instruments IWR1443 mmWave Sensor
2023-01
Power
Texas Instruments
[Jan 1 2023] Texas Instruments IWR1443 integrated monolithic millimeter wave sensor is based on frequency-modelled continuous wave (FMCW) radar technology and is designed to operate in the 76 GHz to 81 GHz frequency band with a maximum continuous chirp of 4 GHz. It uses TI's low-power 45 nm RF complementary metal oxide semiconductor (RFCMOS) process to achieve an unprecedented level of integration with an ext ...

Texas Instruments' DC/DC converters provide 100 V inputs and are ideal for industrial power and battery packs
2023-01
Semiconductors
Texas Instruments
[Jan 1 2023] The Texas Instruments LM5164 synchronous step-down converter is designed to regulate a wide input voltage range, minimizing the need for external surge suppression components. In a heat-enhanced 8-pin SO PowerPAD package. The 1.27mm stitch pitch provides adequate spacing for high pressure applications. The controllable minimum start-up time of 50 ns helps achieve a large step-down conversion rati ...

The CSA of Texas Instruments has the characteristics of PWM suppression and precision integrated shunt resistor
2023-01
Semiconductors
Texas Instruments
[Jan 1 2023] The Texas Instruments INA253 voltage Output CSA features a 2 mL integrated shunt resistor and is designed to monitor bidirectional current within a common model range of -4v to + 80v, independent of supply voltage. Three fixed gain options are available, including 100mv /A, 200mv /A and 400mv /A. The integration of precision resistors with zero-drift chop amplifiers provides calibrated equivalent ...

The Sensirion SCD40 CO2 sensor is used for indoor air quality applications
2023-01
Power
Sensirion AG
[Jan 1 2023] Sensirion's deep expertise in miniaturized sensors makes this a breakthrough step in the field of CO(2) sensing. At 10.1 mm x10.1 mm x6.5 mm, the SCD40 is five times smaller than its predecessor, the SCD30. Using the principle of photoacoustic sensing, the size of optical cavity is greatly reduced without affecting the performance of the sensor. In addition, the SCD40 CO(2) and RH/T sensors take ...

Diodes ZXGD3113 synchronous rectifier provides higher efficiency and board space savings
2023-01
Power
Diodes Incorporated
[Jan 1 2023] Diodes ZXGD3113 is a type of synchronous rectifier controller designed to couple mosFeTs to replace lossless Schottky rectiters in power supplies based on flyback or resonant converter topologies. The ZXGD3113 controls an external MOSFET, such as 100 V 16 millioeur N-channel DMT10H015LPS, configured to work as an ideal diode. Replacing Schottky rectiators with ZXGD3113+MOSFET can significantly im ...

InnoSenT's long-range radar sensors are ideal for a variety of traffic applications
2023-01
Connectors
Isocom Components 2004 LTD
[Jan 1 2023] InnoSent's IVS-282 radar sensor has a long detection range. It can detect moving objects up to 400 meters. Due to its high sensitivity and advanced MMIC technology, the sensor provides accurate and reliable data. The IVS-282 radar sensor is a K-band radar transceiver. It operates in the 24 GHz ISM band and provides data through analog I/Q output. It also comes with an integrated low noise amplifi ...